These are a few of the diagrams I have used for reference on the suspension and steering linkages. The diagrams are from the steering wheel, steering column and down to the …

Jul 8, 2014 · There are two sets of pipes; flow and return from the power steering pump, and the other set that goes to and from the steering ram itself. The longer pipes with lots of bends are …

It is also a critical part of the stability for the steering column. Inside the car disconnect the servo connections to the brake pedal and the brake switch on the side of the pedal.

The new design has the step effect for the linkage arms, the left wiper whole on the linkage being a fraction bigger than the right hand side. This obviously ensures the correct locating of the …

The long linkage itself sits in a slot under the housing for the gear box. How this stays in place and works is simply beyond belief, but it works so I won’t knock it.

The throttle linkage can be held in place by either a nut, split pin, R-clip or similar. Remove the retaining fastener and the throttle rod will be able to be pulled from the throttle mechanism.

The new design has the step effect for the linkage arms, the left wiper whole on the linkage being a fraction bigger than the right hand side. This obviously ensures the correct locating of the …

Pedal link close up, not the removal holes just to the right of the pedal linkage on the bracket. Undo the Brake line from the reservoir and then the two bolts, it will just come off, with lots of …

There aren’t many diagrams on the net for the wiring of these switches. If you need to change the switch out for a different style or want to know how it works here is the diagram I made.

The main job I wanted to do was the removal of the steering column loom, these wires took me ages to get threaded down to the bottom and only a few seconds to get back out.